/
v.1.9.0 updated 07/17/2026
Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Hi!
Let me explain why you need notes. Just click on me
[Test Note] Check Empire 2000E/III on my setup
Nagatron 1400 ER
The Nagatron 1400 ER is an induced magnet (IM) cartridge fitted with an elliptical stylus profile. Its output of 4 mV suits the standard MM input of any phono stage without extra gain. Rated tracking force runs from 1.5 to 2.0 g with a nominal setting of 1.8 g. The stylus RS-1400ER is user replaceable, and Phono Culture lists one compatible replacement stylus for this model.
- Class:
Entry-Level
- Mounting
- standard 1/2"
- Weight & Dimensions (H×W×D)
- 6 g
- Output Voltage
- 4 mV
- Frequency Response
- 20–20 000 Hz
- Channel Separation
- 24 dB
- Channel Balance
- ≤ 1.5 dB
- Recommended Load
- 30–100 kΩ (nominal 50 kΩ)
- Tracking Force
- 1.5–2.0 g (nominal 1.8 g)
- Compliance Value
- > 8 × 10⁻⁶ cm/dyne
- Cantilever
- aluminum pipe
Additional Info
The Nagatron 1400 ER trades ultimate resolution for a smooth, forgiving ride through vocals and midrange, helped by its Super-Permalloy shielding. The elliptical tip on an aluminum cantilever keeps the presentation relaxed rather than incisive, kind to imperfect pressings and budget setups. Casual listening and mainstream rock or pop on turntables where tracking ease matters most suit it well. The stylus is replaceable when it wears.
Replacement styluses for Nagatron 1400 ER
| EVG | 2214D | Elliptical |
Sound × Setup
Loading chart...
Collectors
Loading...
add 01/18/2026 · upd. 08/02/2026