/
v.1.7.3 updated 01/24/2026
Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Damn it, I tried, but mistakes happen. Check if you don't want to fall into a trap!
cartz@phonoculture.com
Hi!
Let me explain why you need notes. Just click on me
[Test Note] Check Empire 2000E/III on my setup
Audio-Technica AT33EV
- Class:
Audiophile
- Mounting
- standard 1/2"
- Weight & Dimensions (H×W×D)
- 6.9 g · 16 × 16.6 × 26.5 mm
- Output Voltage
- 0.3 mV
- Frequency Response
- 15–50 000 Hz
- Channel Separation
- 30 dB
- Channel Balance
- 0.5 dB
- Recommended Load
- ≥ 100 Ω
- Tracking Force
- 1.8–2.2 g (nominal 2.0 g)
- VTA
- 23°
- Compliance Value
- 10 × 10⁻⁶ cm/dyne (100 Hz); 40 × 10⁻⁶ cm/dyne (static)
- Cantilever
- tapered duralumin pipe cantilever
Additional Info
Non-replaceable stylus (integrated), retip only. Dual Moving Coil, PCOCC wire, neodymium magnets; body Aluminium/Synthetic Resin; terminal pins Brass; coil impedance 10 Ω (1 kHz)
add 01/29/2026 · upd. 01/29/2026